• SLIMLINE BUILT IN UNIT

    Available as either a single or double sided unit. These units have a firebox made out of either 304 stainless steel or mild steel painted black. The firebox is designed to be built into a brick or other non- combustible structure, with allowance for combustion air to be brought in under the firebox from any of the side walls. This combustion air can be brought in through a louvre, a shadow line step with an opening in it, or even ducted under the floor from another room. Inside the firebox is a Drop In grate, with control valve for easy lighting and flame adjustment. The unit if taken with the optional frame in stainless steel or black steel, can be finished off very simply with this slim frame as an edging, creating a very sleek look. If the unit is taken without the optional frame, it can be built in behind a customized frame of heat resistant material such as granite. Giving the home owner immense choice in final look. Available in 1000, 1400 mm OR 2000 mm sizes. Heating Capacity: 10 to 15 Kw, 400 - 600m3 dependent on model chosen.
  • CLASSIC BUILT IN UNIT

    Available as either a single sided or double sided unit. These units have a steel firebox c/w with a standard 40mm thick black frame. This firebox gets built into your masonry wall. On completion of building, the grate style chosen, as well as any of the 6 optional trims, can be easily fitted to the firebox. This gives considerable versatility to the unit in enabling a wide range of looks to suit each person’s individual style. Perfect for the developer, who can build in a standard firebox and later customise this to each purchaser’s choice as the units are sold. Available in 700 or 1000mm size. Choice of standard frame or any of the 6 optional frames. Heating capacity: 5 to 10kw, 200 - 400m3 dependent on model chosen.
  • CONCEPT

    The Infiniti Concept Gas fire is designed to be hung on a wall, or with the addition of a top and bottom section, be installed as a modernistic mantle unit. Ideal for complementing today’s more modern architectural styles. These units require no messy building or costly alterations. Instead they simply bolt to the wall to give an easy and time saving installation, without the mess and disruption of building. The top and bottom sections of the mantle are available in a choice of 3 colours. If you want your own colour scheme these sections can be over painted by your installer to your individual requirements. Heating Capacity: 5-7kw, 200-300m3 depending on model chosen.

    CHOICE OF COLOURS

    Copper Brown Red
  • SYMPHONY

    This sleek wall mounted unit is designed to optimize the reflection of the flames in its brushed stainless steel rear wall, magnifying the effect of the flames for a stunning visual effect. Not only is this unit good looking but also a powerful heater capable of heating 400m3. Being wall hung, these units are remote from young fingers, making them very safe for families with small children. The unit simply bolts to the wall and gets connected to a gas supply making installation very easy. Heating Capacity: 10Kw, 400m3
  • DROP IN GRATE

    MODERN STYLING AT ITS BEST Our drop in grates are designed to simply drop into a hole in a slab, very much like a kitchen hob drops into the kitchen counter. The slab can be made out of any non combustible material; concrete, granite, marble, etc. to enable you to make a fashion statement to suit your home. It is imperative for the grate to function, that there is an adequate air supply to the underside of the slab. All our Drop in Grates are provided with a louvre for you to build into the brick structure to allow the required amount of air in. Airflow in a room reacts differently to a flame located against or near a rear wall, to a flame located in the middle of the room. Our Drop In Grates are designed to compensate for this. If you are installing a Drop in unit with a wall at the rear of it, order a “Single Sided Unit”; if the grate is to be installed away from any walls order a “Double Sided Unit”.
    • Available as standard in 700, 1000, 1400 or 2000 sizes
    • Available as specials with variable length & depth
    • Available in black or brushed stainless steel
    • Black unit is supplied with natural white stones to enable you to cover the grate in stones if so desired
    • Grates can be fitted flush with slab surface or recessed into it to give different looks
    Heating capacity:
    • Standard Models: 5-15kw, 200-600m3
    • Special Models: 10-15kw, 400-600m3
  • CONVERSION GRATE

    THE EASY WAY TO CONVERT AN EXISTING INEFFICIENT FLUED GAS OR WOOD FIRE TO A HIGHLY EFFICIENT FLUE-LESS These grates are designed to enable the easy conversion of an existing steel or brick fireplace into a flue-less gas fire. If you have an open wood or anthracite burning fire it is as simple as sealing up the chimney opening to prevent heat loss up the chimney, running gas to the fire and connecting up our flue-less grate. No more lighting of fires, no more smoke smell in the house, no more cleaning out the ash. Simply large quantities of heat with the convenience of a flick of a switch. If you have a flued gas fire it is even easier. Remove the flued grate, seal up the chimney flue and fit the flue-less grate to the existing gas line. Generally a 1 to 2 hour job. Our flue-less grate is 3 times more efficient than most flued grates. That is either a lot more heat for your house at no extra cost or the same heat with a big reduction in running cost. Plus, you will be doing your bit for our environment by utilising our gas reserves in a more beneficial manner.
    • Available in 550, 700, 850 and 1050mm size
    • Single or Double sided versions available
    Heating capacity: 5-10kw, 200-400m3 depending on model chosen.
  • 8KW FREESTANDING

      This freestanding unit comes standard with 80mm high legs and a conversion plate. By simply removing two screws and fitting the conversion plate, the unit can be changed to create a cube effect. These units can be installed either sitting on floor tiles or a hearth, or can be installed on top of our wood storage table, thereby creating a range of looks from the same unit. The units all have rear heat deflector plates, enabling them to be installed 150mm off plaster walls. A snug fit for best look. These units are available with both top and rear flue exits. Heating capacity: 8kw / 320m3.
  • 10KW FREESTANDING

      This freestanding unit comes in two options - either with standard black legs or beautiful stainless steel legs. In addition to the stainless steel legs, the glass door is also upgraded to a full frame, black glass, frameless door. The legs allow for wood storage below the fireplace. The units all have rear heat deflector plates, enabling them to be installed 150mm off plaster walls. A snug fit for best look. These units are available with both top and rear flue exits. Heating capacity: 10kw / 400m3.
  • 13KW FREESTANDING

      This freestanding unit comes as either a convection cube unit, allowing air movement to flow through the fireplace and warm up the air in the room. This cube can be installed on a log storage box or any other, non-combustible surface. Or, a standard option on black or stainless steel legs. The legs allow for wood storage below the fireplace. The units all have rear heat deflector plates, enabling them to be installed 150mm off plaster walls. A snug fit for best look. These units are available with both top and rear flue exits. Heating capacity: 13kw
  • 14KW DOUBLE SIDED FREESTANDING

      This freestanding unit makes a bold statement in the home. Generating large amounts of heat and a beautiful view of the flame. Positioned either on a log storage box or on any other solid based structure, you wont be disappointed. This unit only has a top exit because of the double sided door system. Heating capacity: 14kw
  • 18KW  FREESTANDING New in 2019 - Freestanding Convection Unit

    In 2018 we introduced out 18kW builtin CCWS and have receive a very favourable response from shops and home owners alike. There have been repeated requests for a free standing version of this very capable heater. Available in single or double sided. This unit only has a top exit because of the double sided door system. Heating capacity: 18kw
  • Infiniti Wood Inserts

    Infiniti’s wood stoves are available as inserts. Using the same tried and trusted fireboxes as the freestanding units, these models are designed to be built into brickwork to give you that swisher look. They are manufactured with a built-in convection system. This funnels air around the outside of the hot firebox, bringing it back into the room as hot air. This increases the efficiency of the unit to just below that of the freestanding unit. They are ideal for those existing homes that have a brick chimney as well as for new homes/renovations where chimneys are to be built. With the same high temperature combustion and long burn times of the freestanding units, these inserts are capable of heating large areas of home. Available as standard with a 40mm black frame. Available in the following versions:
    Unit Heat (Kw) Heat m3
    Single Sided Insert       8 Kw 320
    10 Kw 400
    13 Kw 520
    18 Kw 720
    Double Sided Insert   14 Kw 560
    18 Kw 720

Go to Top